the formlabs finish kit makes the final stagesof 3d printing quick and easy. when your parts have finished printing, the build platformwill return to the top of the machine. always wear disposable gloves when handling uncuredresin. open the cover and unclamp the build platform. turn the platform over so that noresin drips. transfer the build platform to the finishing tray. the parts will be attachedto the build platform. take the scraper and
how to finish 3d printed parts, try to get underneath the base of the part.hold the build platform and tray by placing your other hand below the build platform.always scrape away from yourself. the scraper is a sharp tool and should be used with care.after removing all of your parts, place them in the rinse tub filled with isopropyl alcohol.we recommend using isopropyl alcohol of 90%
concentration or higher. agitate the partusing the rinse basket for a couple of minutes. if the part is very delicate, you may wantto skip this step. let the part soak for 10 minutes. this will remove any remaining uncuredresin. then, remove the supports by pulling them away from the part. for very delicatefeatures, you may want to break the supports
more carefully using the tweezers or a smallpair of clippers. allow the part to air dry. evaporating the alcohol will lead to the bestsurface finish. return the build platform to the printer. and that's it. check out ourforums at support.formlabs.com for further tips on painting and to see lots of cool printsfrom the formlabs community. form on.
